JVC AV 32DF74 - Manual (Page 49)

Button Functions
49
Turns the TV on or off.
Press the P
OWER
button
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 7:
0 (Zero)
7 (Seven)
Power
Number Buttons - 10Key Pad
Use the 100+ button to directly access channels above channel 99. For example, to move to
channel 124, press 100+, 2 (Two), 4 (Four).
100+ Button
Selects the signal input source for the television: Input-1, 2, 3 or 4 for video devices like VCR’s
DVD players, or camcorders.
I
NPUT
1, 2, 3, 4
Note:
• When you return to TV mode, press the R
ETURN
+/T
V
button or direct 10 key pad.
• You can also access the FRONT CONTROL PANEL screen by using the M ENU button on
the front of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT menu. Choose INPUT by pressing M
ENU † on
the front panel and choose input by using the C
HANNEL
+/- buttons ( √ OPERATE ® ).
Input
Digital-In
Use this button to directly select the digital-in input.
Press the D
IGITAL
-I
N
button
Use these buttons to raise or lower the TV’s volume level.
Volume +/–
Your remote control includes illuminated buttons for key features like
C
hannel +/– and
Volume +/–. Press the light button to turn the illumination on for 5 seconds.
Light
Use these buttons to move up or down all the available channels your TV is able to receive.
Channel +/–
AV-32\36DF74 English 6/4/03, 9:22 AM 49