JVC HR-A53U - Manual (Page 27)

27
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Place the arrow next to "FUNCTION SET" by pressing
CH
5∞, then press OK.
ACCESS AUTO TIMER
SCREEN
3
Place the arrow next to "AUTO TIMER" by pressing
CH
5∞, then press OK. Now skip to step 2 of the
procedure below.
Or, during on-screen timer programming ...
ACCESS AUTO TIMER
SCREEN
1
In step 7 in the On-Screen Timer Programming proce-
dure (
੬
pg. 25), press MENU.
SELECT MODE
2
Place the arrow next to
your choice ("ON" or
"OFF") by pressing CH
5∞.
RETURN TO NORMAL
SCREEN
3
Press MENU as many times as necessary.
NOTE:
For safety, when AUTO TIMER is set to “OFF”, all other VCR
functions are disabled while the Timer mode is engaged. To
disengage the timer, press TIMER.
Auto Timer
When the Auto Timer is set to ON the timer is automatically
engaged when the VCR's power is turned off and automatically
disengaged when the VCR is powered back on.
AUTO TIMER
ON
=OFF
PRESS ( 5,∞) TO SELECT
PRESS (MENU) TO END
q
2 3
6 5 / 8
3
¶ 7 8
1 ¡
1 2 3
4 5 6
7 8
0
9
MENU
TIMER
OK
CH
MENU
CH OK