Playback using the remote control, Installing the battery, Beam effective area (indoor use) – JVC GR-D54 User Manual
Page 15: Buttons and functions
VIDEO PLAYBACK
EN
15
MasterPage: Video_Right
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional playback
functions possible. (
Installing The Battery
The remote control uses one
lithium battery (CR2025).
1
Pull out the battery holder
by inserting a pointed
instrument into the slot.
2
Insert the battery in the
holder, and be sure to have
the “+” mark visible.
3
Slide the holder back in
until you hear a click.
Beam Effective Area
(indoor use)
When using the remote control,
be sure to point it at the remote
sensor. The transmitted beam’s
approximate effective distance
for indoor use is 5 m.
NOTE:
The transmitted beam may not be
effective or may cause incorrect
operation when the remote sensor
is directly exposed to sunlight or
powerful lighting.
Buttons And Functions
A Infrared beam transmitting window
The following buttons are available only when the
camcorder’s Power Switch is set to “PLAY”.
B AUDIO Button ..................................... (
C PAUSE Button* .......................................... (
Up Button .................................................. (
D SLOW Rewind Button ................................ (
E REW Button* ....................................... (
Left Button ................................................ (
F INSERT Button .......................................... (
G STOP Button* ...................................... (
Down Button ............................................. (
H SHIFT Button ............................................ (
I EFFECT ON/OFF Button .......................... (
J EFFECT Button ........................................ (
K SLOW Forward Button............................... (
L FF Button* ........................................... (
Right Button .............................................. (
M PLAY Button* ....................................... (
N A. DUB Button ........................................... (
O DISPLAY Button ................................. (
The following buttons are available when the camcorder’s
Power Switch is set to “A” or “M”.
a S.SHOT (Snapshot) Button*
b START/STOP Button*
c Zoom (T/W) Buttons** ........................ (੬ pg. 12, 16)
*
Functions the same as each corresponding button on the
camcorder. (
** Functions when the camcorder’s Power Switch is set to
“PLAY” as well.
Playback Using The Remote Control
1
1
2
3
Slot
Remote sensor
T
W
GR-D54EX.book Page 15 Thursday, November 27, 2003 8:03 PM