JL Audio Stealthbox SB-GM-SLVCNSL/10W3 - Manual (Page 4)

Sheet SKU#011142 Revision 8/15/00
SB-GM-SLVCNSL/10W3-D6, JL AUDIO, Inc 2000 • Page 4
STEP 14: Apply the supplied templates to the proper sides of the
console body (as indicated on the template). The templates show
where to cut the console body as well as where to drill two holes
through the console body. Drill and cut where indicated.
STEP 15: Drill a 3/8" hole through the stock mounting bracket
at each of the four locations indicated in Diagram #1.
STEP 16: Run speaker wire to the console area.
STEP 17: Bolt the bracket to the bottom of the Stealthbox
(Ensure proper operation of the Stealthbox prior to mounting it to
the bracket).
X X
X X
1 "
1 9/16"
2 1/2"
1 "
1 9/16"
2 1/2"
Diagram #1