JVC LPT0827-001B - Manual (Page 63)

Masterpage:Right-No-Heading
Filename [DR-M1EK_08Recording.fm]
Page 63 September 4, 2003 11:33 am
63
Check, cancel and change programmes
A
Disengage the timer mode.
When “ #” lights on the front display panel
Press # (TIMER), then press DVD 1.
When “ ” lights on the front display panel
Press DVD 1.
When “SAT #” lights on the front display panel
Press SAT # on the unit, then press DVD 1.
B
Access Programme Check screen.
C
Access the programme screen.
Press rt to select the programme, then press ENTER.
D
Change a programme.
Change the settings of the desired recording options as
required.
● Refer to steps D – I in “Manual Timer Programming”
(
੬
pg. 58).
E
Complete timer correction.
Press PROG/CHECK.
● The previous screen resumes.
F
Engage the unit’s timer mode.
For VIDEO Plus+ or Manual Timer Programming
Press
# (TIMER).
For On-Disc Timer Programming
Press DVD
1.
For Automatic Satellite Programme recording
Press SAT
# on the unit for 2 seconds or more.
Press PROG/CHECK.
● To return to the previous
screen after you check the
programme, press PROG/
CHECK again.
To cancel the programme
Press
rt repeatedly to
select a programme to be
cancelled, then press
&.
Programme’s information on the front display panel
You can check the details of the programmes even when the
power is turned off. (It is necessary that the Power Save mode
(
੬
pg. 95, “POWER SAVE”) is disengaged or the unit is not
in timer standby mode.) However, it is not possible to cancel
or change the programme’s setting.
A Press PROG/CHECK.
● “NEW PROG” or “P-1” (if 8 programmes have already
been set) appears.
B Press rt repeatedly until the desired programme
number (“P-1” to “P-8”) appears, then press ENTER.
C Press e.
● Each time you press e, the indication changes as follows
(the settings in parentheses are examples):
Date (“DATE 08.03SU”) ] Start time (“ON 11:00”) ] Stop
time (“OFF 11:30”) ] Channel (“PR 1”) ] Weekly/Daily
(“MO-FR DAILY”) ] Programme number (“P-1”) and
Recording speed (SP) ] (Back to the beginning)
D Press PROG/CHECK to complete checking.
● The normal display resumes.
DR-M1EK_08Recording.fm Page 63 Thursday, September 4, 2003 11:34 AM