JVC UX-V30R - Manual (Page 22)

18
Using External Equipment
Listening to External
Equipment
You can listen to external equipment such as an MD recorder,
turntable or other auxiliary equipment.
■ First make sure that the external equipment is properly
connected to the System. (See page 4.)
1 Set the VOLUME control to the minimum
position.
2 Press the MD/AUX button.
“AUX” appears on the display.
3 Start playing the external equipment.
4 Adjust the VOLUME control to the desired
listening level.
5 Apply sound effects, if you wish.
■ Press the AHB PRO button to reinforce the bass sound.
■ Press the BASS/TREBLE button on the Remote Control to
control the tone. (See “Controlling the Tone (Bass/Treble)” on
page 7.)
To exit from MD/AUX mode, select another source.
Note: For operation of the external equipment, refer to its
Instructions.
Recording the System’s
Source to External Equipment
You can record the System’s sources to external equipment which
is connected to the LINE OUT or OPTICAL DIGITAL OUT
terminals of the System, such as cassette deck or MD recorder, etc.
■ First make sure that the external equipment is properly
connected to the System. (See page 4.)
Play the System’s CD Player or Cassette
Deck, or tune into a station.
■ The recording level is not affected by the VOLUME level. It is
not affected by any sound effect, either.
Note: For operation of the external equipment, refer to its
Instructions.
MD/AUX
MD/AUX
REMOTE CONTROL RM-RXUV5R
DIMMER SLEEP
DISPLAY FM MODE MD/AUX
AHB PRO AUTO PRESET CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
PTY/EON
UP
SET
DOWN
TUNER BAND TAPE
VOLUME
CD
DISPLAY MODE
TREBLE
AHB PRO
BASS
VOLUME +, –
DOWN UP MULTI CONTROL
TAPE FM/AM CD
STANDBY/ON
PHONES
MD/
AUX
REC
REV MODE
AHB
PRO
TIMER
CLOCK
VOLUME
CD OPEN/CLOSE
AHB PRO
VOLUME +, –
EN12-23.UX-V30R[B] 00.1.20, 8:15 PM 18