JVC TU-DB1SU - Manual (Page 20)

- 19 -
CONNECTING THE EXTERNAL DEVICES
If your TV and VCR both have two scart sockets you can connect as follows.Unplug the aerial lead and
connect this to the ANT IN socket on the rear of your receiver. Connect the aerial lead (supplied) from the
LT OUT on the receiver to the ANT IN on the rear of the VCR. Then connect an aerial lead from the LT OUT
on the VCR to the ANT IN socket on the rear of your TV.
If your VCR has only one scart socket, connect only Scart 1 to VCR.
Connect a scart lead from the TV SCART socket on the rear of the receiver to the SCART 1 socket on the
rear of the TV.
Connect a scart lead from the VCR SCART to the SCART 1 on the VCR, and connect a scart lead from
the SCART 2 on the VCR to the SCART 2 on the rear of the TV.
S
UWÃ6r vhy
CvAv
W8S
Tph ‡Ã
Tph ‡Ã!
UW
UW
6r vhy
6r vhyÃPˆ‡
6r vhyÃD
6IU@II6Ã DI W8S9WS UW 98ÃDIÃ%W 9DBDU6GÃ6V9DPÃPVUÃ 8P6YD6GÃ 6IU@II6Ã PVU
I‚‡Ãˆ†r
You can now record digital terrestrial television programmes by selecting SCART 1 on the VCR. The VCR
will also be able to record analogue television channels in the usual way. Both live and recorded digital terrestrial
television programmes can be viewed on the TV by selecting the TV's AV input.