JVC RM-P210 - Manual (Page 25)

25
OPERATION MENU
MENU OPERATION
This menu sets the functions built into the RM-P210.
STEP
0.1 dB
18.0 dB
0 dB
9 dB
18 dB
OFF
BLACK
STRETCH
BLACK
COMPRESS
ALC+EEI
LOLUX
–
No. Item Function, Operation Available Settings Initial Setting
5A
5B
5C
5D
5E
5F
5G
5H
5I
5J
5K
5Z
SHUTTER
V. GAIN STEP
V. GAIN MAX
GAIN LOW
GAIN MID
GAIN HIGH
SMOOTH TRANS
FUNC1
FUNC2
FUNC3
FUNC4
BACK
Selects whether the front panel SHUTTER control varies the
shutter speed in steps or in fine variation.
STEP
: Shutter speed variation in steps.
VARIABLE: Fine, continual variation to be used when shooting
a computer monitor, etc.
Selects the step of the gain variation using the GAIN control in
the VARIABLE GAIN mode.
0.1 dB
: Turning the GAIN control varies the gain in 0.1 dB
steps.
1.0 dB : Turning the GAIN control varies the gain in 1.0 dB
steps. 0.1 dB
Selects the maximum gain value in the VARIABLE GAIN mode.
9.0 dB
: The GAIN control can vary the gain up to 9.0 dB.
12.0 dB : The GAIN control can vary the gain up to 12.0 dB.
18.0 dB : The GAIN control can vary the gain up to 18.0 dB.
Selects the gain value when the front panel GAIN switch is set to
the LOW position.
Selects the gain value when the front panel GAIN switch is set to
the MID position.
Selection of the gain value when the front panel GAIN switch is
set to the HIGH position.
ON/OFF setting of the smooth transition function which prevents
sudden change when the position of the GAIN switch or W.BAL
switch on the front panel is changed.
OFF : SMOOTH TRANS is deactivated.
ON
: SMOOTH TRANS is activated.
Sets the function assigned to function key F1 on the front panel.
Sets the function assigned to function key F2 on the front panel.
Sets the function assigned to function key F3 on the front panel.
Sets the function assigned to function key F4 on the front panel.
Returns to the previous display.
STEP
VARIABLE
1.0 dB
0.1 dB
9.0 dB
12.0 dB
18.0 dB
-3 dB
0 dB
3 dB
6 dB
9 dB
12 dB
18 dB
OFF
ON
NONE
BLACK STRETCH
BLACK COMPRESS
ALC+EEI
LOLUX
FAW
AUTO KNEE
SKIN DETAIL
COLOR MATRIX
DETAIL
DNR
–
The KY-D29/KY-D29W enables the GAIN HIGH to be set to 3 dB but this is
invalid because the camera itself is not compatible with this setting.