JVC RM-P210 - Manual (Page 23)

23
PROCESS MENU
MENU OPERATION
ON
NORMAL
NORMAL
MIDDLE
OFF
ON
NORMAL
ON
No. Item Function, Operation Available Settings Initial Setting
4A
4B
4C
4D
4E
4F
4G
4H
DETAIL
DETAIL LEVEL
DETAIL V/H
DETAIL FRQ
SKIN DETAIL
AUTO KNEE
KNEE POINT
COLOR MATRIX
ON/OFF setting of the detail enhancement function.
OFF : Detail enhancement is deactivated.
ON
: Detail enhancement is activated.
Adjusts the detail enhancement level.
Increasing the level
: Sharpens details.
Decreasing the level : Softens details.
Selects whether the detail enhancement is applied more strongly
in a horizontal or vertical direction.
Increasing the level : Applies detail enhancement more
strongly in a H direction.
Decreasing the level : Applies low detail enhancement in the H
direction.
Sets the detail enhancement frequency according to the object.
LOW
: Low frequency to be used when shooting a coarsely
patterned object.
MIDDLE : Standard frequency.
HIGH
: High frequency to be used when shooting a small or
finely patterned object.
AUTO : Automatic adjustment of the detail enhancement fre-
quency according to the object.
ON/OFF setting of the skin tone detail function, which displays
natural, wet skin colors by reducing detail enhancement on the
skin areas.
OFF : Skin tone detail function is deactivated.
ON
: Skin tone detail function is activated.
ON/OFF setting whether the auto knee function is activated accord-
ing to the knee point setting to be made below.
OFF : Auto knee function is deactivated.
ON
: Auto knee function is activated.
Sets the knee point level at which the auto knee function is de-
activated.
Increasing the level : The knee function is activated at a
higher video level.
Decreasing the level : The knee function is activated at a lower
video level.
ON/OFF setting of whether the color matrix function.
OFF : The color matrix function is deactivated.
ON
: The color matrix function improves the color reproducibility.
Note that noise increases with this setting.
OFF
ON
10 to
NORMAL to
-10
(21 steps)
10 to
NORMAL to
-10
(21 steps)
LOW
MIDDLE
HIGH
AUTO
OFF
ON
OFF
ON
10 to
NORMAL to
-10
OFF
ON
This menu sets the functions built into the camera.
(Some of the following items cannot be set if a local remote control unit is connected to the camera or depending on the connected
camera model.)
This item cannot vary the detail enhancement in the V direction.
NOTE
The actual variation in the knee point occurs step by step because
this is set as a result of the knee point setting of the camera.
NOTE