beautypg.com

Danemark, Suisse, Europe – JBM electronic 900 User Manual

Page 18: Technical information, Related standards, Regulatory notices, Fcc statement

background image

Gateway 900 Installation Manual

Page 16




Danemark
ƒ La prise mâle d’alimentation doit respecter la section 107-2 D1 de la norme DK2 1a ou DK2 5a.

Suisse
ƒ La prise mâle d’alimentation doit respecter la norme SEV/ASE 1011.

Europe
ƒ La prise secteur doit être conforme aux normes CEE 7/7 (“SCHUKO”)
ƒ Le cordon secteur doit porter la mention ou et doit être de type H03VVF3GO.75

(minimum).



Technical Information

Related Standards
The Gateway 900, 905 and 910 have been designed to the following standards:

EMC

FCC PART 15, SUBPART B, Class A
CISPR 22/EN 55022, Class A
IEC 61000-4-2/EN 61000-4-2
IEC 61000-4-3/EN 61000-4-3, ENV 50204
IEC 61000-4-4/EN 61000-4-4
EN 61000-4-5
IEC 61000-4-6/EN 61000-4-6
ITU-T-K.20
IEC 61000-3-2/EN 61000-3-2
IEC 61000-3-3/EN 61000-3-3
ETSI EN 300 386 V1.2.1 (1998-11)

CE Statement (Europe)

This product complies with the European EMC Directive 89/336/EEC.

Regulatory Notices


FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy; and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference to radio communications, in which case the user will be required to correct the
interference at their own expense.

© JBM Electronics Co.

1-800-489-7781

www.jbmelectronics.com