Screen 1 – initial login screen – JBM electronic 900 User Manual
Page 10

Gateway 900 Installation Manual
Page 8
3.
The Gateway will display the Login Screen.
Screen 1 – Initial Login Screen
4.
Once this screen is displayed, Log in to the Gateway using root for the user
name and gateway for the password. These entries are case sensitive and
must be entered in the appropriate case.
This userid and password is used for Console and Telnet access.
Note: We recommend you change password using the instructions
in the Gateway Operations Manual.
Note: Password security for the JBM Application is disabled as a shipment
default. This security can be enabled through the JBM Administration
Menu. Refer to the Operations Manual for instructions.
© JBM Electronics Co.
1-800-489-7781
www.jbmelectronics.com