JVC Model KS-FX200 - Manual (Page 12)

12
ENGLISH
Storing your own sound adjustments
You can adjust the sound modes (BEAT, POP, SOFT: see page 10) to your preference and
store your own adjustments in memory.
1
Call up the sound mode you want to adjust.
See page 10 for details.
2
To adjust the bass or treble sound level
Select “BAS” or “TRE.”
To turn on or off the loudness function
Each time you press LOUD, the loudness function turns on
and off alternatively. (
=
go to step 4)
3
Adjust the bass or treble level.
See page 11 for details.
4
Press and hold SOUND until the sound mode
you have selected in step
1 flashes on the
display.
Your setting is stored in memory.
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 10.
Within
5 seconds
Within
5 seconds
Within
5 seconds
3 2 2 1,4
SOUND
LOUD
SOUND
EN10-12.KS-FX200[J]f 9/27/00, 6:19 PM 12