JVC CA-MXDVA5 - Manual (Page 16)

– 11 –
English
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on.
Turn the VOLUME control
clockwise to increase the volume or
counterclockwise to decrease it.
• The volume level can be adjusted in
32 steps (VOL MIN, VOL 1 —
VOL 30, and VOL MAX).
When using the remote control, press VOLUME + to
increase the volume or press VOLUME – to decrease it.
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on headphones.
DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; otherwise, a
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on
the unit or start playing any source next time.
REMEMBER you cannot adjust the volume level
while the unit is on standby.
SUBWOOFER LEVEL indicator always
lights up when the unit is on.
SUBWOOFER
LEVEL
Reinforcing the Bass Sound
This function only affects the playback sound, but does not
affect your recording.
Turn the SUBWOOFER LEVEL control
clockwise to increase the subwoofer
sound or counterclockwise to decrease it.
• The subwoofer level can be adjusted in 4
steps (LEVEL 1 — LEVEL 4.)
If you turn the control clockwise up to the
subwoofer LEVEL 4, “MAX” flashes on
the display for a few seconds.
When using the remote control, press SUBWOOFER LEVEL
to adjust the subwoofer level. The subwoofer level changes as
LEVEL 1
= LEVEL 2 = LEVEL 3 = LEVEL 4 =
(back to the beginning).
To turn down the volume level temporarily
Press FADE MUTING on the remote control.
The volume level gradually decreases to
“VOL MIN.”
To restore the sound, press the button again.
EN01-13.CA-MXDVA5[UG]_f 01.3.23, 1:42 PM 11