JVC IKD-LH2000 - Manual (Page 43)

43
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Aux input
2000 D
Playing an external component
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See “To select the external component to
use—Ext Input” on page 33.)
1
Select the external component
(Line In).
* If “Line In” does not appear on the display,
see page 33 and select the external input
(“Line In”).
* Displayed only when one of the following
sources is selected—FM, AM and CD.
Note on One-Touch Operation:
When you press CD/CD-CH, the power
automatically comes on. You do not have to press
to turn on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound as you want. (See
pages 25 – 28.)
CD
Line In *
EN43-43LH2000[U]f.pm5 3/28/02, 14:26 43