JVC IKD-LH2000 - Manual (Page 41)

41
ENGLISH
To select a disc using the disc lists
If you forget what discs are loaded in the CD
changer, you can show the disc title list and
select a disc on the list shown on the display.
• The display can show only six disc names at a
time.
1
While playing a CD, press and hold
5 (up) or ∞ (down) until a disc name
list appears on the display.
Note:
If a disc has an assigned disc name, it will be
shown on the display. However, if the disc has not
been played before, its disc number will appear.
2
Press 5 or ∞ to show the other disc
name list, if necessary.
3
Select the number (1 – 6) for the disc
you want to play.
Selecting CD playback modes
To play back tracks at random (Random Play)
You can play back the tracks at random.
1 Press MODE (M) to enter the
functions mode while playing a
disc.
“Mode” appears on the display.
2 Press RND (random), while
“Mode” is still on the display, so
that the RND indicator is
highlighted on the display.
Each time you press RND, the
random play mode changes as
follows:
RANDOM indicator RND indicator
(See the following table.)
Random 1 Random 2
Random Off
Ex.: When you select “Random 1.”
Plays at random
Random Highlighted All tracks of the current
1 disc, then the tracks of
the next disc and so on.
Random Flashes All tracks of all discs
2 inserted in the magazine.
When Random Play is turned on, the RANDOM
indicator lights up or flashes on the display.
Mode
RND
Indicator
EN39-42LH2000[U]f.pm5 3/28/02, 14:26 41