JVC IKD-LH2000 - Manual (Page 29)

29
ENGLISH
OTHER MAIN FUNCTIONS
4
Adjust the PSM item selected.
5
Repeat steps 2 to 4 to adjust the other
PSM items if necessary.
6
Finish the setting.
To set clock— Clock Hr, Clock Min
You can set the clock using the PSM control.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press 5 or ∞ repeatedly until “Clock” is selected
as the PSM category (it is shown on the left side
of the display).
3 Press ¢ or 4 to select “Clock Hr
(hour).”
4 Turn the control dial to adjust the hour.
5 Press ¢ or 4 to select “Clock Min
(minute).”
6 Turn the control dial to adjust the minute.
7 Press SEL (select) to finish the setting.
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
• The PSM items are grouped into five
categories—“Disp (display),” “Clock,” “Tuner,”
“Color,” and “Audio.”
Basic Procedure
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See pages 30 and 31.)
2
Press
5
(up) or
∞
(down) repeatedly
until your desired PSM category
appears on the left side of the
display.
3
Select the PSM item you want to
adjust.
EN29-38LH2000[U]f.pm5 3/28/02, 14:25 29