JVC AV 32FA44 - Manual (Page 41)

Button Functions
41
The R ETURN + button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH– buttons.
R
ETURN
+ and hold for three seconds
The channel currently active has been programmed as your return+ channel. Now scan through
the channels using the C
HANNEL
+/– buttons.
R
ETURN
+
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the R
ETURN
+ button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.
Return +
Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2, or
V2-Component, Video-3 or Video-4 (Component) for video devices like VCR’s, DVD players, or
camcorders.
Press the I
NPUT
button
AV-36FA54, AV-32FA54 and AV-27FA54 ONLY
AV-36FA44, AV-32FA44, AV-27FA44, AV-36F704, AV-32F704 and AV-27F704 ONLY
Note:
• You can also access the input menu screen by using the M
ENU
button on the front of the TV
instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST
screen. Choose the INPUT by pressing M
ENU † on the front panel and select TV or VIDEO
INPUT by using the C
HANNEL
+/- buttons ( √ OPERATE ® ).
�� ������� ������� ������� ������������
�� ������� ������� ������� ������������ �������
Input
��������������
�����������
�� ������� ������� ������� ������������
�� ������� ������� ������� ������������ �������
GJ English 4/24/03, 12:51 PM 41