JVC DLA-QX1G - Manual (Page 61)

59
ENGLISH
Specifications
Optical mechanism system
• Projection method 3D-ILA device, 1 lens, 3 primary color optical shutter method
• D-ILA device 1.3" measured diagonally (2 048 pixels ×1 536 pixels) × 3 (Total number of pixels : 9 437 184)
• Projecting lens GL-MQ1010G 1:1 fixed focus lens
(separately available) GL-MQ1015SG 1.5:1 fixed focus lens
GL-MQ1020ZG 2.1:1 to 4.9:1 zoom lens
GL-MQ1023SZG 3:1 to 7:1 zoom lens
• Screen size 60" to 300" [recommended] to 867" [maximum] measured diagonally (*with aspect ratio : 4 : 3)
• Light-source lamp 2.0 kW xenon lamp
Electrical system
• Resolution 2 048 dots × 1 536 dots (QXGA full resolution, during RGB input)
• Scanning frequency Horizontal frequency : 31.5 kHz to 135 kHz
Vertical frequency : 48 Hz to 120 Hz
(When HD signal is input, 24 Hz, 25 Hz, and 30 Hz are available.
For details, refer to page 44.)
Input / output
[RGB IN (RGB input)]
1-line, BNC × 5
Analog RGB signal
R : 0.7V(p-p), 75 Ω
B : 0.7V(p-p), 75 Ω
G : 0.7V(p-p), 75 Ω
G on sync : 1V(p-p), 75 Ω (negative sync)
Horizontal sync/composite sync signal (H/Cs)
H : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)
Cs : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)
Vertical sync signal (V)
V : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)
* Some connected devices may not correspond to composite sync (Cs) or G on sync signal.
Horizontal frequency
: 31.5 kHz to 135 kHz
Vertical frequency
: 48 kHz to 120 kHz
Dot clock : 25 MHz to 280 MHz
[CONTROL]
• RS-232C IN : 1-line, D-sub 9-pin × 1
* RS-232C-interface specified control terminal for controlling this projector with a personal
computer.
• RS-232C OUT : 1-line, D-sub 9-pin × 1
* RS-232C-interface specified control terminal for controlling other projectors with a personal
computer connected to this projector.
• REMOTE : 1-line, mini-jack × 1
(To be continued on the next page)
EN59-63QX1G_f.pm6 02.3.7, 13:39 59