JVC SP-UXG70 - Manual (Page 17)

13
Creating 3-dimentional Sound Field
—3D Phonic
• This does not function for MPEG-1/MPEG-2/ASF/DivX
discs.
While playing a disc...
• The selected mode can only be shown on the TV.
Presetting Automatic DVD Video Sound
Increase Level
DVD Video sound is sometimes recorded at a lower level
than other discs and sources. You can set the increase level
for the currently loaded DVD Video, so you do not have to
adjust the volume when you change the source.
• This only functions for DVD Video and DVD-VR format
disc.
Adjusting the Audio Input Level
If the sound from the component connected to the
LINE IN jack is too loud or is too quiet when changing from
another source to LINE, you can change the audio input level
through the LINE IN jack (without changing the volume
level).
Adjusting the Audio Output Level
If the recorded sound on the device connected to the LINE
OUT jack is too loud or too quiet, you can change the audio
output level through the LINE OUT jack (without changing
the volume level).
ACTION Suitable for action movies and sports
programs.
DRAMA Creates natural and warm sound. Enjoy
movies in a relaxed mood.
THEATER Enjoy sound effects like in a major theater.
NORMAL Original recording level.
MEDIUM Output level is increased (less than “HIGH”).
HIGH Output level is increased (more than
“MEDIUM”). (initial setting)
Remote
ONLY
3D PHONIC ACTION 3D PHONIC DRAMA
3D PHONIC THEATER 3D PHONIC OFF
3D PHONIC
AUDIO/MPX
(while holding...)
Remote
ONLY
AHB PRO
DVD LEVEL
NORMAL MEDIUM
HIGH
(while holding...)
(initial setting)
L.IN LVL1 Select this when the sound is too loud
with “L.IN LVL 2” selected. This setting
is recommended when connecting an
audio device other than a portable audio
device to the LINE IN jack.
L.IN LVL2 Select this when the sound is too loud
with “L.IN LVL 3” selected.
L.IN LVL3 Select this when listening to a portable
audio device (initial setting).
L.OUT LVL1 Select this when recording the sound
with a portable audio device (initial
setting).
L.OUT LVL2 Select this when the recorded sound is
too loud with “L.OUT LVL 1” selected.
Remote
ONLY
ENTER/SET
L.IN LVL1 L.IN LVL2
L.IN LVL3
(initial setting)
2 sec.
Remote
ONLY
LINE OUT LEVEL
10
L.OUT LVL1
L.OUT LVL2
(while holding...)
(initial setting)
UX-G70[B].book Page 13 Monday, April 17, 2006 1:41 PM