JVC DR-MH20SUJ - Manual (Page 46)

Filename [DR-MH30UJ_07Timer Recording.fm]
Masterpage:Left0
46
EN
Page 46 Monday, 12 July 2004 14:25
TIMER RECORDING
You can program this unit to timer-record as many as 32 programs.
With the VCR Plus+ system, timer programing is greatly simplified
because each TV program has a corresponding code number
which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
1
Load a recordable disc if recording to DVD.
2
Press PROGRAM to access the program top screen.
3
Press rtw e to select “VCR PLUS+”, then press ENTER.
● When “PROGRAM FULL DELETE UNWANTED TIMER
PROGRAMS” appears on the TV screen, you need to cancel some of
the reserved programs. (
੬ pg. 49)
4
Press the number keys to
enter the VCR Plus+ number of a
program you wish to record.
OR
Press rtw e to select the
desired number key on the
screen, then press ENTER.
Repeat to enter all needed
numbers.
5
Press rt to select “RECORD TO”, then press ENTER. Press
rt to select the desired recording deck, then press ENTER.
6
Press rtw e to select “CONFIRM”, then press ENTER.
● If the number you entered is invalid, “PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY” appears on the TV
screen. Input a valid PlusCode number.
● If “GUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN
RETRY” appears on the TV screen, set Guide Channel Numbers
manually. (
੬ pg. 70)
7
The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
program data.
● To cancel this setting, press RETURN.
8
Press rt to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
● “INPUT TITLE” ( ੬ pg. 52, “Modify Title Name”)
● “CATEGORY” ( ੬ pg. 53, “Modify Category”)
● “WEEKLY/DAILY” ( ੬ pg. 47, “Weekly/Daily Recording”)
● “REC MODE” ( ੬ pg. 37, “Recording Mode”)
9
Press rt to select “OK”, then press ENTER to access the
Program Confirmation screen.
10
Press w e to select “EXIT”, then press ENTER to complete
timer programing.
● To program another timer, press w e to select “CONTINUE”, then
press ENTER.
● If “PROGRAM OVERLAPPED” appears on the TV screen, see
page 49.
NOTES:
● There may be cases that the VCR Plus+ Timer Programing function
prolongs the stop time of the programing.
● When two successive programs are recorded on a DVD-RW disc with
the VCR Plus+ Timer Programing function, the beginning of the
second one may be left off the recording.
● If the copy limited program is received during timer-recording, the unit
enters Record Pause mode. Recording starts again if it is switched to
a recordable broadcast during the time you programed.
VCR Plus+ ® Timer Programing
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
PROGRAM
DISPLAY
CLEAR
0 – 9
VPS/PDC#
RETURN
ENTER
CANCEL
CABLE/DBS
DVD TV
PROGRAM > VCR PLUS+ (1/2)
PLUS CODE NO.
PRESS [PROGRAM]
TO EXIT
SELECT WITH [ ]
THEN PRESS [ENTER]
CONFIRM
RECORD TO
1 2 3 4
1 2
4 5 6
7 8 9
0 DELETE DELETE ALL
DVD ENTER
SELECT EXIT
PROGRAM
3
1 2 3 1 2 2 3
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “Changing VCR Plus+
® Setting” (
੬ pg. 70) and
set the Guide Channel number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, the wrong channel number will
be displayed on the VCR Plus+ program screen in step 7. When this
happens, set the correct Guide Channel number for that station.
(
੬ pg. 70, “Changing VCR Plus+
® Setting”)
Cable Box and DBS Receiver Users
To timer-record a satellite broadcast using the VCR Plus+
system:
A Perform “Cable Box and/or DBS Receiver Control Setting”
(
੬ pg. 24).
B Perform “VCR Plus+ ® Timer Programing” ( ੬ pg. 46).
C Leave the cable box or DBS receiver’s power on.
DR-MH30UJ_00.book Page 46 Monday, July 12, 2004 3:17 PM