Specifications – JVC GD-V4200PCE-G User Manual
Page 30
30
Specifications
General:
Model name
GD-V4200PZW/GD-V4200PZW-G/GD-V4200PCE/GD-V4200PCE-G
Frame colour
GD-V4200PZW/GD-V4200PCE : Silver
GD-V4200PZW-G/GD-V4200PCE-G : Gray
Screen size
Type 42 wide format
Aspect ratio
16:9 (Wide format)
Mass
36.0 kg (79.2 lbs)
External dimensions
103.5 x 64.0 x 8.9 cm (40
3
/
4
x 25
1
/
4
x 3
5
/
8
inches) (W x H x D)
Power requirements
AC 120 V/230 V, 50 Hz/60 Hz
Rated input current
3.9 A (AC 120 V)/2.1 A (AC 230 V)
Effective screen size
92.1 x 51.8 cm (36
3
/
8
x 20
1
/
2
inches) (W x H), 105.7 cm (41
5
/
8
inches) diagonally
Number of pixels displayed
853 (H) x 480 (V)
Number of colors displayed
16.77 million (256 colors for each of RGB)
Compatible systems
• VIDEO A, B input: NTSC, PAL, SECAM
• COMPONENT input: 480i, 576i, 480p, 720p, 1080i
Audio output
INTERNAL: 2W + 2W (TYP at impedance 8
Ω
)
EXTERNAL: 3W + 3W (TYP at impedance 6
Ω
)
Speakers
2 pcs., built-in (4 cm x 7 cm oval-shaped, impedance 8
Ω)
Operating conditions
Temperature: 0˚C to 40˚C
Relative humidity: 20% to 80%
Input/output terminals*
VIDEO A
• Y/C input
Y/C terminal x 1
Y : 1V(p-p)/75
Ω
C : 0.286V(p-p)/75
Ω
for NTSC
C : 0.3V(p-p)/75
Ω
for PAL/SECAM
• Video input
BNC terminal x 1
1V(p-p)/75
Ω
• Video output
BNC terminal x 1
1V(p-p)/75
Ω
• Audio input
Pin jack terminal x 2 (L/R), 500mV(rms)/22k
Ω
or over
VIDEO B
• Y/C input
Y/C terminal x 1
Y : 1V(p-p)/75
Ω
C : 0.286V(p-p)/75
Ω
for NTSC
C : 0.3V(p-p)/75
Ω
for PAL/SECAM
• Video input
BNC terminal x 1
1V(p-p)/75
Ω
• Video output
Pin jack terminal x 1
1V(p-p)/75
Ω
• Audio input
Pin jack terminal x 2 (L/R), 500mV(rms)/22k
Ω
or over
COMPONENT input
• BNC terminal x 3
Y : 1V(p-p)/75
Ω
P
B
/B-Y : 0.7V(p-p)/75
Ω
P
R
/R-Y : 0.7V(p-p)/75
Ω
RGB input
• D-sub 3 line 15-pin terminal x 1
Video signal : 0.7V(p-p)/75
Ω
Sync signal : TTL level or 0.3V(p-p)/75
Ω
• Audio input
Pin jack terminal x 2 (L/R), 500mV(rms)/22k
Ω
or over
RS232C input
D-sub 9-pin terminal x 1
SPEAKER OUT terminal
Impedance 6
Ω
to 16
Ω
Options (not supplied)
Stand Unit
TS-C420P1W, TS-C420P4W, TS-C420P5W, TS-C420P7W
Wall Mounting Unit
TS-C420P2W, TS-C420P6W
Ceiling suspension Unit
TS-C420P3W
Video Interface Kit
IF-C420P1W (Only for GD-V4200PCE and GD-V4200PCE-G)
* GD-V4200PCE and GD-V4200PCE-G do not have the following input terminals – VIDEO A, VIDEO B, COMPONENT and
RGB AUDIO.
Specifications and design are subject to change without notice.
Notice on transportation
This Monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from other than JVC or JVC-authorized dealers.
24-32.GD-V4200PZW-A[EN]/f
00.2.23, 5:19 PM
30