JVC 0805TNH-II-IM - Manual (Page 45)

45
Button Functions
Selects the signal input source for the television: VIDEO-1, VIDEO-2 or VIDEO-3 for video
devices like VCRs, DVD players, or camcorders.
Press the I NPUT button
Notes:
• You can also select the input by pressing the I NPUT button on the side of the TV instead of
the remote control.
Input
The R ETURN + button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
R ETURN + and hold for three seconds
The channel currently active has been programmed as your return+ channel. Now scan
through the channels using the C HANNEL +/– buttons.
R ETURN +
You will return to your programmed channel.
• To cancel your return+ channel, press and hold the R ETURN + button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel
return+.
Return +
RETURN CHANNEL
PROGRAMMED!
LCT1899-001B-A ENG 45 8/5/05, 11:41:57 AM