Editing, Dubbing to a vcr, Pg. 43, 4 – JVC GR-D271 User Manual
Page 43
EN
43
MasterPage: Start_Right
EDITING
A Yellow to VIDEO IN
B Red to AUDIO R IN
C White to AUDIO L IN
To use this camcorder as a player
1
Following the illustrations, connect the
camcorder and the VCR’s input connectors.
2
Start playback on the camcorder. (
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(
● To choose whether or not the following displays
appear on the connected TV
• Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(
੬ pg. 31, 36) Or, press DISPLAY on the
remote control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”.
(
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV”. (
Dubbing To A VCR
2
1
3
TV
VCR
Open the cover.
Audio/Video cable
(provided)
To AV
connector
GR-D271US.book Page 43 Monday, January 17, 2005 11:42 AM