JVC GR-D271 - Manual (Page 12)

GETTING STARTED 12
EN
MasterPage: Left
How To Attach The Core Filter
Attach the core filters to the cables. The core
filter reduces interference.
1
Release the stoppers on both ends of the
core filter.
2
Run the cable through the core filter, leaving
approx. 3 cm (1-3/16") of cable between the
cable plug and the core filter.
Wind the cable once around the outside of the
core filter as shown in the illustration.
3
Close the core filter until it clicks shut.
NOTES:
● Take care not to damage the cable.
● When connecting a cable, attach the end with the
core filter to the camcorder.
Stopper
3 cm (1-3/16")
Wind once.
Core filter
GR-D271US.book Page 12 Monday, January 17, 2005 11:42 AM