beautypg.com

Quick review, Recording from the middle of a tape, Normal playback – JVC GR-D271 User Manual

Page 20: Still playback, Video playback, 20 recording from the middle of a tape, Pg. 20), M recording from the middle of a tape, Pg. 20) in

background image

MasterPage: Advan_Heading0_Right

20

EN

NOTES:

● The time code cannot be reset.

● During fast-forwarding and rewinding, the time

code indication does not move smoothly.

● The time code is displayed only when “TIME

CODE” is set to “ON”. (

੬ pg. 34)

Quick Review

Enables to check the end of the last recording.
1) Press

during the Recording-Standby

mode.
2) Tape is rewound for about several seconds
and played back automatically, then pauses in
the Recording-Standby mode for the next shot.

● Distortion may occur at start of playback. This is

normal.

Recording From The Middle Of A Tape

1) Play back a tape or use Blank Search
(

੬ pg. 21) to find the spot at which you want to

start recording, then engage the Still Playback
mode. (See the right column.)
2) Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch, then start recording.

1

Load a cassette. (

੬ pg. 16)

2

Set the VIDEO/MEMORY Switch to “VIDEO”.

3

Set the Power Switch to “PLAY” while

pressing down the Lock Button located on the
switch.

4

To start playback, press 4/9.

5

To stop playback, press 8.

● During Stop mode, press 3 to rewind, or 5

to fast-forward the tape.

To control the speaker volume
Slide the Power Zoom Lever (VOL. +/–) towards
“+” to turn up the volume, or towards “–” to turn
down the volume.

NOTES:

● The playback picture can be viewed in the LCD

monitor, viewfinder or on a connected TV.
(

੬ pg. 22)

● If Stop mode continues for 5 minutes when power

is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to “OFF”, then to “PLAY”.

● When a cable is connected to the AV connector,

the sound is not heard from the speaker.

Still Playback

Pauses during video playback.
1) Press 4/9 during playback.
2) To resume normal playback, press 4/9
again.

● If still playback continues for more than about

3 minutes, the camcorder’s Stop mode is
automatically engaged.

Normal Playback

M

A

Speaker

4/9

Lock Button

3

VIDEO/MEMORY

Power
Switch

8

MENU

5

VOL. +/–

VIDEO PLAYBACK

GR-D271US.book Page 20 Monday, January 17, 2005 11:42 AM