JVC CU-V10E - Manual (Page 2)

MAJOR FEATURES
1. Highly sensitive MS (Mid-Side) stereo microphone
2. Serial angle variation from 0° to 120° (with a 90°
click-stop)
3. Special anti-vibration structure to reduce noise
PART NAMES
INSERTING THE BATTERY
1 Slide the battery cover in the direction indicated by the
arrow.
2 Insert the "AAA" battery (UM-4) as shown in the illustration,
positioning it so that the negative – side is inserted first.
3
Close the battery cover.
* The provided battery is for your trial use. Please replace it
with a new one at your earliest convenience.
0 ° 90 ° 120 °
TURNING THE POWER ON/CHECKING
THE BATTERY
1 Set the power switch to ON.
2
The Power/Battery remaining lamp blinks momentarily, then
goes off.
(It remains off after blinking when the power is turned on in
order to reduce battery consumption.)
3 Replace it with a new one when the power is turned on but
the lamp doesn't blink.
4 Do not forget to turn the power switch OFF when the
microphone is not in use.
HOW TO USE
Adjust the stereo angle according to the examples shown below.
Stereo angle
When widely-surrounding sound is recorded ................. 120°
(the sound of train, airplanes, fireworks, etc.)
When less-surrounding sound is recorded ........................ 90°
(the sound of birds singing, musical instruments, etc.)
When a specific sound is recorded ..................................... 0°
OFF ON
OPEN
OFF ON
OPEN
Power Power .... the lamp blinks
momentarily.
Stereo angle change switch
Power switch Power/Battery remaining lamp
120°
90°
0°
© 1997 VICTOR COMPANY OF JAPAN, LTD.
Windscreen
Power/Battery remaining lamp
Power switch
Battery cover
Fastening screw
Stereo angle
change switch
ø3.5 stereo
mini-plug
Straight cord
Arrow ( )
Battery cover
Microphone shoe
To attach the camcorder, use
the optional Shoe Adapter
CU-V418U.