JVC AV-P950U - Manual (Page 4)

4
Part names
BEFORE USE
Setup
Side illumination
Camera arm
Remote control light reception section
Side illumination
Stage
Control panel
Rear panel
Camera head
Slide film holder
Close-up lens
Lock release button
(UNLOCK)
POWER switch
Back illumination
1.
While pressing the UNLOCK button 1 , raise the camera
arm so that it stands in the direction shown 2 .
2.
When the camera arm is raised all the way, release the
UNLOCK button.
3.
When the UNLOCK button returns to its original position
and the camera arm is locked, release the camera arm.
4.
Turn the camera head in the direction shown 3 until a click
is heard. The camera head should now be facing the stage.
5.
Move the side illumination arms in the directions shown,
first
4 and then 5 .
CAUTION
• When using the UNLOCK button, do not release the
camera arm until it is locked. Do not apply exces-
sive force on the side illuminations (arms and lights),
otherwise, a malfunction or injury may result.
2
1
3
5
4