JVC AV 32D305 - Manual (Page 21)

Remote Programming
21
Search Codes
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press and hold down the P
OWER
button, then press the R
ETURN
+ button for more than three
seconds.
3) Release the R
ETURN
+ button, then release the P
OWER
button.
4) Press the P
OWER
button on the remote, and see if the cable or satellite box responds.
5) If there was a response, press R
ETURN
+. The codes are now set. If there was no
response, repeat Step 4. If you repeat Step 4 a total of 52 times without a response, use
the remote control that came with your equipment.
6) Press R
ETURN
+ to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or
“DVD”.
2) Press and hold down the VCR or DVD P
OWER
button, then press the R
ETURN
+ button for
more than three seconds.
3) Release the R
ETURN
+ button, then release the VCR or DVD P
OWER
button.
4) Press the VCR or DVD P
OWER
button, and see if the VCR or DVD responds.
5) If there was a response, press R
ETURN
+. The codes are now set. If there was no
response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (30 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
6) Press R
ETURN
+ to exit.
AV-27\32D305 English 1/21/04, 9:38 AM 21