beautypg.com

Using the remote controller, Installing the battery – JVC KD-G407 User Manual

Page 26

background image

26

ENGLISH

This unit can be remotely controlled as instructed
here (with an optionally purchased remote
controller)
. We recommend that you use remote
controller RM-RK50 or RM-RK60 with your unit.
(Ex.: When you are using RM-RK60)

Before using the remote controller:
• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no
obstacle in between.

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness
of the remote controller decreases, replace
the battery.

1

. Remove the battery holder.

1) Push out the battery holder in the

direction indicated by the arrow using a
ball point pen or a similar tool.

2) Remove the battery holder.

2

. Place the battery.

Slide the battery into the holder with the
+ side facing upwards so that the battery
is fixed in the holder.

Remote sensor

Lithium coin
battery (product
number: CR2025)

USING THE REMOTE CONTROLLER

(back side)

(back side)

3

. Return the battery holder.

Insert again the battery holder by pushing it
until you hear a clicking sound.

WARNING:

• Store the battery in a place where children

cannot reach.
If a child accidentally swallows the battery,
consult a doctor immediately.

• Do not recharge, short, disassemble, or heat the

battery or dispose of it in a fire.
Doing any of these things may cause the battery
to give off heat, crack, or start a fire.

• Do not leave the battery with other metallic

materials.
Doing this may cause the battery to give off
heat, crack, or start a fire.

• When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the
battery may start to give off heat, crack, or start
a fire.

• Do not poke the battery with tweezers or similar

tools.
Doing this may cause the battery to give off
heat, crack, or start a fire.

CAUTION:

DO NOT leave the remote controller in a place
(such as dashboards) exposed to direct sunlight
for a long time. Otherwise, it may be damaged.

EN26-27_KD-G407[EE]f.p65

5/3/04, 2:28 PM

26