JVC HD-70A478 - Manual (Page 74)

74
OSD Information
This OSD appears when the digital channel that you have selected is too weak to receive or no
signal is being detected for that channel.
Weak Signal
Weak Signal
15
If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM"
appears on the television screen. It appears when that channel is not receiving a signal and you
have the Noise Muting function OFF and you have a single screen. It moves automatically every
two seconds to prevent the screen from burn-in.
Note:
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off
functions that you set, are still active.
No Program
Invalid Signal
If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It
appears when the input is PC and it is a single screen.
LCT2063-001E-A ENG.indd 74 LCT2063-001E-A ENG.indd 74 5/25/07 9:12:03 AM 5/25/07 9:12:03 AM