JVC DynaPix LT-32DX7BJ - Manual (Page 26)

48 49
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
 We may change the design and specifications without notice.
Specifications
Main unit
Terminals / Connectors
Terminal name Terminal type Signal type (IN) Signal type (OUT)
Input / Output
terminals
EXT-1
Euroconnector x 1
(SCART connector)
Composite video, S-video,
Analogue RGB, AUDIO L / R
TV out
EXT-2 Euroconnector x 1
(SCART connector)
Composite video, S-video,
Analogue RGB, AUDIO L / R
Dubbing out
(S-VIDEO out is
available only for DTV
channels)
Input terminals
EXT-3
RCA connectors x 3,
S-VIDEO connector x 1
Composite video, S-video
AUDIO L / R
EXT-4 RCA connectors x 5
Analogue component
(576i (625i) / 480i (525i),
Progressive : 576p (625p) / 480p (525p),
HD : 1080i (1125i), 720p (750p))
AUDIO L / R
EXT-5 (HDMI-1)
HDMI connector x 1
HDMI
(576i (625i) / 480i (525i) /
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p)) EXT-6 (HDMI-2)
PC INPUT
D-SUB (15 pins) x 1 Analogue PC signal (P. 48)
Output
terminals
AUDIO OUT RCA connectors x 2 Audio L / R
Headphone
Stereo mini-jack x 1
(3.5 mm in diameter)
Headphone
output
“T-V LINK” allows the TV to share information easily with a connected “T-V LINK” compatible device.
By using T-V LINK :
 You can send the ATV channel information programmed on the TV to the “T-V LINK” compatible device, so that
both the TV and the external device have the same channel settings. When connecting a new external device,
channel information is loaded into it, allowing channel setup to be completed very quickly. For more details, refer
to the external device’s manual.
 You can easily record the TV programme you are viewing on a “T-V LINK” compatible device by using the
“DIRECT REC” feature. For more details, refer to the external device’s manual.
 After timer-record setting, the TV will instruct the recorder to start and stop recording, via DIRECT REC.
*Macintosh* computers are not supported.
(Macintosh is a registered trademark of
Apple Computer, Inc.)
 If the signal doesn’t appear, check that the vertical
frequency on the PC is set to “60Hz”.
Technical information
Some cable companies transmit a signal called “ACI” which contains information that allows TV channels to be
registered automatically on your TV.
When an ACI signal is received, “ACI Start / ACI Skip” appears in the “Auto Program” screen.
Connect a “DVI“ device to “EXT-5 (HDMI)” using “DVI-HDMI” conversion cable. Connect analogue sound output of
the DVI device to L and R terminals in EXT-4.
 Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”  (P. 35)
 EXT-6 input does not support DVI devices.
 EXT-6 input does not support analogue sound (EXT-4).
Resolution 640 x 480 (VGA) 1024 x 768 (XGA)
Vertical frequency (Hz) 60.0 60.0
What is “T-V LINK”?
What is “ACI” (Automatic Channel Installation)?
PC Signals that can be displayed
Connect “DVI” devices
Fuse
Attach a new plug following the steps below. If in doubt, contact your local retailer.
 Never connect to the larger terminal marked with an “E”, the safety earth
symbol “ ” or coloured green or green-and-yellow.
 The wires in the mains lead on this product are coloured with the following code:
· Blue: Neutral wire (connect to the black terminal, or one marked “N”)
· Brown: Live wire (connect to the red terminal, or one marked “L”)
Open the plug as illustrated on the right.
 When replacing the fuse, always use a correctly rated and approved type and
re-fit the fuse cover when finished.
If in doubt, contact your local retailer.
If you accidentally cut the power cord
Change the fuse in the plug
Important
 This TV has the CAM (Conditional Access Module) slot for watching pay-per-view.
Please note that the CAM and viewing card must be purchased separately.
Model LT-40DS7BJ LT-32DX7BJ/SJ LT-26DX7BJ/SJ
Broadcasting systems CCIR, I
Colour systems PAL
· The EXT terminals also support the NTSC 3.58/4.43 MHz system.
Channels and frequencies
 Analogue :
E21-E69 (UNITED KINGDOM)
IR A-J, E2-E12, E21-E69 (IRELAND)
 Digital : 474 MHz-850MHz (channel 21-68)
Sound-multiplex systems NICAM (I) system.
Teletext systems
Analogue : FLOF (Fastext), WST (World Standard System).
Digital : MHEG 5 UK profile
Power requirements AC 220 V - 240 V, 50/60Hz
Audio output (Rated power output) 10 W + 10 W
Speakers
6.6 cm round x 4 5.0 cm round x 2
Power consumption
[standby]
227 W
[0.5 W]
134 W
[0.6 W]
120 W
[0.6 W]
Screen size
(visible area size measured diagonally) 101 cm
80 cm 66 cm
Dimensions (W x H x D: mm)
[without stand]
1000 x 720.5 x 293
[1000 x 670.5 x 117.3]
800 x 591.9 x 244.4
[800 x 545 x 133.5]
672 x 517.9 x 244.4
[672 x 471 x 133.5]
Weights
[without stand]
29.3 kg
[24.5 kg]
17.9 kg
[16.3 kg]
14.7 kg
[13.1 kg]
Accessories (See “Check accessories”, P. 7)
48-49 2/20/2006 11:21:32 AM