JVC GET0074-001A - Manual (Page 16)

16
ENGLISH
Other convenient RDS functions
and adjustments
Changing the display mode while
listening to an FM station
You can change the initial indication on the display
to station name (PS NAME) or station frequency
(FREQ) while listening to an FM RDS station.
• See also “Changing the general settings (PSM)”
on pages 25 and 26.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press ¢ or 4 to select “TU DISP
(tuner display).”
3 Turn the control dial to set to the desired indication
(“PS NAME” or “FREQ”).
4 Press SEL (select) to finish the setting.
Note:
By pressing DISP (D) (display), you can change the
display while listening to an FM RDS station.
Each time you press the button, the following information
appears on the display:
• Then, the display goes back to the original indication
in several seconds.
To search your favourite programme type
1
Press and hold TP/PTY (T) for more
than 2 seconds while listening to an
FM station.
2
Select one of the PTY codes.
PTY search for your favourite programme
starts after 5 seconds.
Ex.: When “ROCK M” is selected
• If there is a station broadcasting a programme of
the same PTY code as you selected, that station
is tuned in.
• If there is no station broadcasting a programme
of the same PTY code as you selected, the
station will not change.
Note:
In some areas, the PTY search will not work correctly.
The last selected PTY code appears.
OR
Station name
(PS NAME)
Station frequency
(FREQ)
Programme type
(PTY)
EN12-18KS-LH6R_LH4R[E]f.pm5 1/29/02, 9:53 AM 16