beautypg.com

Jura Capresso impressa F90/F9 User Manual

Page 20

background image

20

EMPTY TRAY. Take out the tray, empty it and

reinstall it.

PRESS MAINTENANCE

Ⅲ Press maintenance key .

MACHINE CLEANING

TABLET / PRESS MAINTENANCE (Fig. 6). You

will hear an acoustic signal.

MACHINE CLEANING

EMPTY TRAY. You will hear an acoustic signal.

PRESS MAINTENANCE

MACHINE CLEANING

EMPTY TRAY. You will hear an acoustic signal.

PLEASE SELECT

Ⅲ Wipe coffee powder tank with a dry cloth after the cleaning

program has finished.

Ⅲ Now the cleaning operation is complete.

16. De-scaling

The coffee machine features an integrated de-scaling programme.
The procedure takes some 30 minutes.

JURA de-scaling tablets which are specially designed for the
de-scaling program of your IMPRESSA are available at your
authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate de-scaling agents.

Your machine will inform you if it needs de-scaling.
You can still draw off coffee or hot water / steam and start
the de-scaling programme later.

Switch off the system before starting the de-scaling pro-
gramme. Once started, the de-scaling programme must not
be interrupted.

If acidic de-scaling agents are used, remove any splashes and
drops from sensitive surfaces, in particular surfaces made of
natural stone and wood, alternatively take appropriate pre-
ventive measures.

In any case wait until the de-scaling agent is used up and the
tank is empty. Never refill de-scaling agent.

MACHINE CALCIFIED / PLEASE SELECT

Ⅲ Use the key

to switch off the coffee machine.

GOOD BYE

Ⅲ Remove hot water nozzle / 2-stage frothing jet.
Ⅲ Take out the water tank.
Ⅲ Press maintenance key

until the following message appears.

EMPTY TRAY

AGENT IN TANK

Completely dissolve the content of one blister (3 tablets) in a
jug containing 0.5 liters of water, and fill the mixture in the
water tank. Reinstall the water tank.

Ⅲ Put a sufficiently large container under the hot water jet (15).

PRESS MAINTENANCE / AGENT IN TANK

Machine de-scaling

Ⅲ The de-scaling agent comes out of the hot water jet in intervals.

After some intervals the de-scaling agent is discharged directly
in the drip tray.

EMPTY TRAY. You will hear an acoustic signal.

REFILL WATER

Thoroughly rinse the water tank and fill it with fresh cold tap
water. Then reinstall it.

Ⅲ Put a sufficiently large container under the hot water jet (15).