Jura Capresso impressa F90/F9 - Manual (Page 14)

14
13.1 Programming the filter
Refer to Chapter 6.1 «Inserting the filter».
13.2 Programming the water hardness
Refer to Chapter 5 «Adjusting the water hardness».
13.3 Programming the aroma INTENSIVE or
STANDARD
The aroma for the powder quantities ( / / ) was
adjusted to Intensive in the factory. If requested it can also
be set to Standard.
Ⅲ Use the key
to switch on the coffee machine.
Ⅲ
WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ
PRESS MAINTENANCE
Ⅲ MACHINE RINSING:
Ⅲ
PLEASE SELECT
Ⅲ Press programming key
until you hear an acoustic signal.
Ⅲ Touch symbol until the following message is displayed:
Ⅲ
AROMA INTENSIVE
Ⅲ Press symbol , you will hear an acoustic signal, IN-
TENSIVE flashes.
Ⅲ Use the symbols
to adjust the aroma to STANDARD.
Ⅲ Press symbol
to confirm the new settings.
Ⅲ
AROMA STANDARD
Ⅲ Use the symbols
to reach the next programming stage or
press programming key to quit Programming Mode.
13.4 Programming the temperature
Ⅲ Use the key
to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ
HELLO, MACHINE HEATING UP
Ⅲ
PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ
PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Touch symbol
until the following message is displayed:
Ⅲ
TEMP. HIGH
Ⅲ Press symbol
, you will hear an acoustic signal and HIGH
flashes.
Ⅲ Use the symbol
to adjust the temperature to NORMAL.
Ⅲ Press symbol to confirm your settings.
Ⅲ
TEMP. NORMAL
Ⅲ Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
13.5 Programming the water quantity
Ⅲ Use the key to switch on the coffee machine.
Ⅲ
WWW. IMPRESSA-F-LINE.COM
Ⅲ
HELLO, MACHINE HEATING UP
Ⅲ
PRESS MAINTENANCE
Ⅲ
MACHINE RINSING:
Ⅲ
PLEASE SELECT
Ⅲ Press programming key
until you hear an acoustic signal.
Ⅲ Press symbol until the following message is displayed:
Ⅲ
WATER QUANTITY
Ⅲ Press symbol
.