JVC 2EN User Manual

Page 14

FEATURE:

Quick Review

PURPOSE:

To check the end of the last
recording.

OPERATION:

1) Press “

” and release quickly

during the Record-Standby mode.

Ⅲ

Tape is rewound for about 2
seconds and played back
automatically, then pauses in
Record-Standby mode for the
next shot.

NOTE:

Distortion may occur at start of
playback. This is normal.

FEATURE:

Retake

PURPOSE:

To re-record certain segments.

OPERATION:

1) Make sure the camcorder is in the

Record-Standby mode.

2) Press either RETAKE button to

reach the start point for new
recording. Pressing “F” forwards
the tape and pressing “R” reverses
it.

3) Press Recording Start/Stop Button

to start recording.

NOTE:

Noise may appear during Retake.
This is normal.

FEATURE:

5Sec. Rec (5-sec. Recording)

PURPOSE:

To record a scene for 5 seconds,
providing quick scene transitions like
those seen in TV programmes.

OPERATION:

1) During Record-Standby, press

5SEC. REC. “

5S” appears and

5Sec. Rec is reserved.

2) Press Recording Start/Stop Button.

Recording starts, and after
5-second recording is finished, the
camcorder reenters the Record-
Standby mode automatically.

Ⅲ

To cancel the 5Sec. Rec.
function, press 5SEC. REC again
so that “

5S” disappears.

NOTE:

The Fader (

੬

pg. 20) cannot be

activated by pressing 5SEC. REC.

PAUSE

5SEC. REC

RETAKE (R/F)

Viewfinder

5Sec. Rec mode indicator