JVC 2EN - Manual (Page 10)

EN
11
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
Tripod Mounting
ALIGN AND TIGHTEN
1 Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.
2
4
3
2
1
1
Shoulder Strap Attachment
ATTACH STRAP
1
Following the illustration at left, thread the strap
through the top of the eyelet
1 , then fold it back
and thread it through the keeper 2 , and then
through the buckle 3 . Repeat the procedure to
attach the other end of the strap to the other eyelet
4 , making sure the strap isn’t twisted.
ADJUST LENGTH
2 Adjust as shown in the illustration at left 1 , then
slide both keepers snug against the eyelets to
prevent slipping
2 .