JVC CH-X100 - Manual (Page 2)

2
ENGLISH
(standby/on/attenuator)
How to reset your unit
While holding SEL (select), press (standby/
on/attenuator) for more than 2 seconds.
This will reset the built-in microcomputer.
NOTE:
Your preset adjustments — such as preset channels or sound
adjustments — will also be erased.
SEL (select)
How to use the MODE button
If you press MODE, the unit goes into functions mode then the number buttons and
¢ / 4
buttons work as different function buttons.
Ex.: When number button 2 works as MO (monaural) button.
To use these buttons as number buttons again after pressing MODE, wait for 5 seconds without
pressing any number button until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
MODE
MO RPT RND 7 8 9 10 11 12
Time countdown indicator
EN02-04-KS-FX621[U] f 12/12/02, 7:13 PM 2