John Deere E-Cut 8500 - Manual (Page 15)

7500/8500 E-Cut Hybrid Fairway Mower 8000 E-Cut Hybrid Fairway Mower
Engine
Type
Maximum rated horsepower 37.1 hp (27.7 kW) @ 2,600 RPM (7500)
43.1 hp (32.2 kW) @ 2,600 RPM (8500) 37.1 hp (27.7 kW) @ 2,600 RPM
Displacement 91.3 cu. in. (1496 cc) 91.3 cu. in. (1496 cc)
Air cleaner 2-stage dry element 2-stage dry element
Cooling system Liquid centrifugal pump Liquid centrifugal pump
Traction type Servo-controlled hydrostatic pump to wheel motors. Optional GRIP All-Wheel-Drive Traction System.
Reel-drive pump Tandem-gear pump N/A
Hydraulic system capacity 12 U.S. gal. (45.4 L) 9.8 U.S. gal. (37.1 L)
Fuel tank capacity 18 U.S. gal. (66.6 L) 13 U.S. gal. (49.21 L)
Steering tires 20×10-8 turf 24×12-12 smooth
Front drive tires 26.5×14-12 turf 24×12-12 smooth
Mower
Number of blades 7 or 11 8 or 10
Cutting unit width Quick Adjust QA5 22 in. (55.9 cm) Quick Adjust QA5 18 in. (45.7 cm)
Reel diameter (std. cutting unit) 5 in. (12.7 cm) 5 in. (12.7 cm)
Total width of cut 100 in. (254 cm) 80 in. (203 cm)
Height of cut
11- and 7-blade 0.25 in. to 1.125 in. (6.4 cm to 28.5 cm) 0.078 in. to 1.125 in. (2 cm to 28.5 cm) requires optional
bedknife for lowest HOC and 3-inch roller for highest
Frequency of clip (FOC))
11- or 7-blade QA5 0.044 in./mph (1.12 mm/km/h),
0.069 in./mph (1.75 mm/km/h) 0.044 in./mph (1.12 mm/km/h),
0.069 in./mph (1.75 mm/km/h)
Rollers 2 in. (5.1 mm) front and rear; 3 in. (7.6 mm) optional 2 in. (5.1 mm) front and rear; 3 in. (7.6 mm) optional
Operating weight wet, full fuel, less operator
Standard cutting units lowered 2,236 lb. (1014 kg) (7500E), 2,340 lb. (1061 kg) (8500E) 2,131 lb. (967 kg)
Dimensions
Height with ROPS 85 in. (216 cm) 83 in. (210.8 cm)
Length with catchers 115 in. (292 cm) 115 in. (292 cm)
Transport width 87 in. (221 cm) 89 in. (226 cm)
Mowing position width 116 in. (295 cm) 93 in. (236 cm)
Ground speed
Mowing 0 to 8.0 mph (0 to 12.8 km/h) 0 to 6.0 mph (0 to 10 km/h)
Transport 0 to 11.5 mph (0 to 18.5 km/h) 0 to 9 mph (0 to 14 km/h)
Reverse 0 to 5.0 mph (0 to 6.4 km/h) 0 to 5.0 mph (0 to 6.4 km/h)
Standard on all models
Throttle Hand throttle at operator’s right
Forward/reverse 2-pedal
Mower lift One-touch single handle
Parking brake
Foot pedal lock for foot-
operated park brake
Seat Deluxe suspension
PTO
Hand lever located on
CommandARM™
Tilt steering Foot operated
Steering
Hydraulic power with double-
acting steering cylinder
Ground pressure 10
Brakes
Disc and dynamic braking
through closed loop
hydrostatic transmission
ROPS
Standard; meets pending
ISO 21299 Standard
Warranty Two-year limited
Certifi cation CE and ANSI B71.4-2004
* Engine hp is provided by engine mfr. for comparison purposes only. Actual operating hp will be less.
Vertis QCA
1300 19th Street, Suite 200
East Moline, IL 61244
Cyan Magenta Yellow Black
95392 Page 15