JVC TV-20F243 - Manual (Page 55)

53
POSSIBLE SOLUTIONS PAGE CAUSE SYMPTOMS
TV shuts off.
Closed caption is not
activated.
RECORDING
TV station stopped broadcasting.
TV station experiencing problems or
program tuned is not closed cap-
tions.
Tune new channel.
Set Sleep Timer to "0".
Try another channel.
TV signal is weak.
Check CATV connection of VHF/
UHF antenna, reposition or rotate
antenna.
The TV/CAP/TEXT button is not
depressed. Press the TV/CAP/TEXT button to
turn on the closed caption.
The video cassette's erase preven-
tion tab is broken off. Place a piece of vinyl tape over
the hole.
Reset the present time. The time is not set correctly.
The recording start/end time is not
set correctly.
The TIMER button has not been
pressed (the REC TIMER indicator is
not lit.).
Press the TIMER button (the REC
TIMER indicator is lit.).
Tape is old or worn. Replace the tape.
Tracking adjustment is beyond range
of automatic tracking circuit.
Adjust tracking manually using the
TRACKING + and – buttons on
the remote control.
Clean the video heads. Video heads are dirty.
The remote control is not aimed at
the sensor. Aim the remote control at the
remote sensor.
REMOTE CONTROL
The batteries are not inserted
correctly.
Insert correctly.
Replace the batteries. The batteries are weak.
There is an obstacle in the path of
the beam.
Clear the path of the beam.
Operate within 15 feet or reduce
the light of the room. Distance is too far or too much light
in the room.
Remote control does
not operate.
Noise bars appear on the
screen.
Timer recording does not
work.
TV recording does not
work.
18
18, 20
20
12, 13
20, 21
35
15-17
45, 46 Reset the start/end time.
46
—
37
55
10
10
10
10
10
Sleep timer is set.
PLAYBACK
MENU
Before setting the clock, you can
operate only 3 Menu options, CLOCK
SET/LANGUAGE/AUTO CLOCK. Set the clock. Can not select MENU
OPTION.
15, 17
5B40401A-E/P50-BACK 15/01/2002, 13:01 53