JVC HR-J430U - Manual (Page 32)

32
SPECIAL FEATURES
1 2
4 5
3
6
8
0
7 9
POWER
NUMBER
ENTER
CH
VOL. +/-
TV/VIDEO
STOP
TV/CABLE/VCR
TV Multi-Brand Remote
Control
In addition to controlling several functions on JVC remote
control TVs, the VCR's remote control can control these
functions on the TV brands listed below.
Before you start . . .
● Turn the TV’s power on using its remote control.
● Set the remote control’s TV/CABLE/VCR switch to TV.
SET TV BRAND CODE
1
Refer to the chart below. While holding down POWER,
enter your TV’s brand code using the NUMBER keys,
then press STOP.
● You don’t have to repeat this step until you replace
your remote control’s batteries.
● PANASONIC has two codes. If the TV does not
function with one code, try entering the other.
TRY OPERATING TV
2
Press POWER on the remote to turn off the TV’s power.
If it comes off, try other operations.
● The POWER, TV/VIDEO, CH5∞, VOL +/– and
NUMBER keys on the remote can all be used to
operate the TV. *Depending on the brand, the TV
channel may not change unless you press ENTER
after having pressed the NUMBER keys.
● To return the remote to VCR control, set the TV/
CABLE/VCR switch to VCR.
NOTE:
Depending on the kind of TV, there may be cases where some
or all functions cannot be operated using the remote control.
TV BRAND NAME BRAND CODE
JVC 01
MAGNAVOX 02
MITSUBISHI 03
PANASONIC 04, 11
RCA 05
SHARP 06
SONY 07
TOSHIBA 08
ZENITH 09
HITACHI 10
SAMSUNG 12
SANYO/SEARS 13