JVC HR-J430U - Manual (Page 20)

20
Superimpose
This function, switchable between ON and OFF, determines
whether or not operational indicators will appear on screen.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Place the arrow next to "FUNCTION SET" by
pressing CH
5∞ or SHUTTLE PLUS 5∞, then press OK.
ACCESS SUPERIMPOSE
SCREEN
3
Place the arrow next to
"SUPERIMPOSE" by
pressing CH
5∞ or
SHUTTLE PLUS 5∞, then
press OK.
SELECT MODE
4
Place the arrow next to
"ON" or "OFF" by pressing
CH
5∞ or SHUTTLE
PLUS 5∞.
RETURN TO NORMAL
SCREEN
5
Press MENU as many times as necessary.
SUPERIMPOSE
=ON
OFF
PRESS ( 5,∞) TO SELECT
PRESS (MENU) TO END
FUNCTION
AUTO TIMER
=SUPERIMPOSE
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
To recall an indication
1 Press OSD.
Ⅲ All indications corresponding to the current status are
displayed for 5 seconds, leaving the counter information,
and RECORD/PAUSE if in the Record Pause mode, on
the screen. (No indication during still and search.)
2 Press OSD again to clear the display.
2 2
q 5 / 8 6
CH
OK
MENU
1 2
4 5
3
6
8
0
7 9
CH
MENU
OK
OSD
SHUTTLE PLUS
"Cassette Loaded" mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCR's EJECT button is pushed.
CH 125 RECORD
THU 12:00 AM PAUSE
] SP
INDEX-1
MEMORY OFF
COUNT –1:23:45
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for 5
seconds.
Clock time
Tape position indicator
Tape speed indicator
INDEX indication
Counter reading
Operation mode
When the operation mode is changed,
the new mode is displayed — RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
The superimposed indication on the TV screen tells you what the VCR is doing.
B E + + +
Counter memory on/off
PLAYBACK AND RECORDING FEATURES (cont.)