JVC HR-J480EU EN - Manual (Page 5)

Filename [HRJ480EU1.fm]
Masterpage:Right
EN
5
FRONT DISPLAY PANEL
A “Timer” Indicator ੬ pg. 23, 25
B Play Indicator
C Record Indicator
D Channel/Clock Display ੬ pg. 11
To switch display, press – –:– –. Channel position is not
displayed during playback.
Mode Display (L-1, L-2 or SAt*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 37 ), “SAt” appears
instead of “L-2”.
E Instant REVIEW Indicator ੬ pg. 16
F VCR Indicator ੬ pg. 19
G SAT # Indicator ੬ pg. 28
ON-SCREEN DISPLAY
When “O.S.D.” is set to “ON” (
੬
pg. 35), various
operational indicators appear on the TV screen.
A Operation mode indicators
B Tape speed SP/LP/EP (HR-J480EU only)
* EP is for NTSC playback only.
C Tape direction
D Counter display ੬ pg. 20
E Tape remaining time indicator ੬ pg. 20
F Tape position indicator
The tape position indicator
appears on the TV screen
when you press
3 or
5 from the Stop mode
or perform an Index Search
(
੬
pg. 17). The position of
“ q ” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape used, the tape position
indicator may not appear correctly.
G VPS/PDC Indicator ੬ pg. 23, 25
H Current day/month/year
I Clock display
J Channel position number and station name/
Auxiliary input indicator (L-1, L-2 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 37), “SAT” appears
instead of “L-2”.
K Timer warning display
A warning appears on the TV screen to tell you that the
timer-recording is to start in 5 minutes if you’re not in the
Timer mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
& .
L Cassette loaded mark
Beginning End
HRJ480EU1.fm Page 5 Friday, January 12, 2001 10:50 AM