JVC HR-J480EU EN - Manual (Page 20)

Filename [HRJ480EU1.fm]
Masterpage:Left
20
EN RECORDING (cont.)
Elapsed Recording Time Indication
1 Display the counter.
Press – –:– – so that a counter reading appears on the TV
screen.
2 Reset the counter.
Press 0000 before starting recording or playback.
● The counter is reset to “0:00:00” and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Tape Remaining Time
Press – –:– – so that the time remaining on the tape
appears on the TV screen.
NOTE:
Depending on the type of tape used, the tape remaining time
reading may not appear right away, or is not correct. “– –:– –”
may sometimes appear, or the display may blink on occasion.
HRJ480EU1.fm Page 20 Friday, January 12, 2001 2:30 PM