JVC HR-J480EU EN - Manual (Page 13)

Filename [HRJ480EU1.fm]
Masterpage:Right
EN
13
T-V LINK
T-V Link Functions
When you connect the recorder to your TV via a fully-wired 21-pin SCART cable (
੬
pg. 7), the following functions are available. You
can use these functions only with a TV offering T-V Link, etc.*
For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by system.
NexTView Link
You can download the EPG (Electronic Programme Guide) information from your TV for timer-programming on the recorder.
For details, refer to the instruction manual of your TV.
TV Auto Power On
The TV will turn on and be set to its AV mode automatically whenever you play a tape.
For details, refer to the instruction manual of your TV.
VCR Auto Standby
You can use your TV’s remote control to turn off the recorder.
For details, refer to the instruction manual of your TV.
Direct Rec
You can easily start recording the programme that you are watching on your TV. When you use this function, set “DIRECT REC” to
“ON” (
੬
pg. 35).
HRJ480EU1.fm Page 13 Friday, January 12, 2001 10:50 AM