JVC 0403MNMCREJEM - Manual (Page 19)

16
Using the Tuner
Case 1: If there is no station broadcasting the
program type you have selected
The broadcast station being currently heard will continue to
be heard.
«
When a station starts broadcasting the program you have se-
lected, this Unit automatically switches to the station. The
program type (TA, News and/or Info) indicator starts blink-
ing.
«
When the program is over, “END” appears on the display
and the Unit goes back to the currently selected station, but
the Enhanced Other Network still remains in standby mode.
Case 2: If there is a station broadcasting the pro-
gram type you have selected
This Unit tunes to the station broadcasting the program. The
program type (TA, News and/or Info) indicator starts blink-
ing.
«
When the program is over, “END” appears on the display
and the Unit goes back to the currently selected station, but
the Enhanced Other Network still remains in standby mode.
Case 3: If the FM station you are listening to is
broadcasting the program type you
have selected
The Unit tunes to the station but the program type (TA,
News and/or Info) indicator starts blinking.
«
When the program is over, “END” appears on the display,
the program type (TA, News and/or Info) indicator stops
blinking and remains lit, but the Enhanced Other Network
still remains in standby mode.
Alarm function
If an “Alarm!” (Emergency) signal is received from a sta-
tion while listening to an RDS station sending the Enhanced
Other Network data, the Unit automatically switches to the
station broadcasting the “Alarm!” signal.
Test function
The TEST signal is used for testing the “Alarm!” signal.
Therefore, it makes the Unit work in the same way as the
“Alarm!” signal does.
If a TEST signal is received from a station while listening
to an RDS station sending the Enhanced Other Network da-
ta, the Unit automatically switches to the station broadcast-
ing the TEST signal.
More about the Enhanced Other Network function More about the Enhanced Other Network function More about the Enhanced Other Network function More about the Enhanced Other Network function
• The Enhanced Other Network data sent from some sta-
tions may not be compatible with this Unit.
• While listening to a program tuned in by this function, the
station does not change even if another network station
starts broadcasting a program of the same Enhanced
Other Network data.
• While listening to a program tuned in by this function, you
can only use the TA/News/Info button and the RDS DIS-
PLAY button as the tuner operation buttons. If you press
any other button, “LOCKED!” appears on the display.
• If the station alternate intermittently between the station
tuned by this function and the currently tuned station
(“WAITING” blinks on the display), press the TA/News/Info
button to cancel the function.
If you do not press the button, the currently tuned station
is received finally (“NOT FOUND” appears this time), and
the indication of the Enhanced Other Network data type
blinking on the display disappears.
CAUTION:
• When the sound alternated intermittently
between the station tuned in by the En-
hanced Other Network function and the
current selected station, cancel the En-
hanced Other Network mode. This does not
constitute malfunction of the Unit.
FS-X5(B)_E.book Page 16 Friday, March 28, 2003 2:49 PM