JVC 0403MNMCREJEM - Manual (Page 10)

7
Getting Started
Connecting the Speakers (SP-FSX5)
These speakers are exclusively for this system. Using with other devices will damage the speakers.
Connect the speaker cords between the speaker terminals of the Unit and those of the Speakers.
• When inserting the speaker wire lead, open the speaker terminal.
• Connect each speaker cord as shown below.
• Since both speakers are the same, you can put either one to the right or left side.
• Do not connect other speakers to the Unit. The difference of the load impedance causes failures.
• Do not use the supplied speakers in parallel with other speakers.
CAUTIONS:
• A TV may display irregular colors if located near the speakers. If this happens, set the speak-
ers away from the TV.
• Handling the speakers
Do not hold the speaker incorrectly. Otherwise it will be damaged. Also, dropping the speaker
can cause injury, or damage to the speaker.
Right side (rear view) Left side (rear view)
Black
Blue
Black
Blue Blue
Black
Black
Blue
SPEAKER terminal description
(On the side panel)
Good Not Good
FS-X5(B)_E.book Page 7 Friday, March 28, 2003 2:49 PM