Jhd3510, Ipod operation – Jensen JHD3510 User Manual

Page 13

JHD3510

iPod OPERATION

This unit is equipped with an iPod ready function that will allow you to control your iPod (if
compatible) using the control panel buttons. The following iPod versions are supported:
•

iPod 3G (firmware version 2.2 only)

•

iPod Mini

•

iPod 4G

•

iPod Photo

•

iPod Nano

•

iPod 5G (Video)

NOTE: iPod and iPod Cable sold separately.

Accessing iPod Mode

To enter iPod mode from any other source, press
the MODE button (4) until “iPod” appears on the
display.

Turning the iPod On/Off

The iPod power turns on automatically when an
iPod is connected to the 30-pin iPod cable, as long
as the vehicle ignition is turned on. You can turn
the iPod off by disconnecting it from the cable or by
turning the ignition off. When the ignition is turned
off, the iPod will pause and then enter sleep mode
after 2 minutes. While the iPod is connected, the
power cannot be turned on or off from the iPod
itself.

NOTE: The iPod will continuously recharge when connected to the unit, as long as the

vehicle ignition is turned on.

Controlling Playback

Pausing Playback
During playback, press the 1/>|| button (8) to pause the iPod player. “Pause” will appear on the
LCD. Press 1/>|| again to resume playback.
Repeat Play
During playback, press the 3/RPT button (5) to repeat the current song. “Repeat” will appear
on the LCD. Press 3/RPT again to stop repeat playback.
Random Play
During playback, press the 4/RDM button (7) to play all songs in the current category in
random order. Random play will begin once the current song has finished playing. “RANDOM”
will appear on the LCD. Press 4/RDM again to stop random playback.
Selecting Tracks
During playback, press the TUNE/SEEK |<< / >>| button (18, 19) to play the previous or next
track in the current category. Press the TUNE/SEEK |<< button (18) once to play the song from
the start position or press TUNE/SEEK |<< twice to play the previous track.
Press and hold the TUNE/SEEK |<< / >>| button (18, 19) to fast reverse/forward the song.

NOTE: If you press and hold the TUNE/SEEK |<< / >>| button to change the current song

to the previous/next song, you will exit fast reverse/forward mode.

Category Search
Press the S-MOD/ENTER button (2) to access Category selection mode. While in Category
mode, repeatedly press the S-MOD/ENTER button to choose file search by Playlist, Artist,
Album, Genre, or Song. After choosing a search category, use the 5/DN (9) and 6/UP (10)
buttons to search the available files on the iPod. Press the 1/>|| button (8) to play the selected
Playlist, Artist, Album, Genre, or Song.

Alternate Display Mode

Press the DISP/SCROLL button (12) to change the display information between single and
double line text display.

iPod

photo

iPod

mini

iPod

nano

HEAD UNIT

8 Din iPod Ready Cable

iPod Cable

iPod

Video