JVC HR-A62U - Manual (Page 29)

29
Edit To Or
From Another
VCR
You can use your VCR as the player or the recorder.
MAKE CONNECTIONS
1
Connect an AV cable (not supplied) between the
player’s VIDEO OUT and AUDIO OUT connectors and
the recorder’s VIDEO IN and AUDIO IN connectors.
● When using your VCR as the recorder and a monaural
VCR as the player, connect the player’s AUDIO OUT
connector to the AUDIO IN L connector on the recorder.
LOAD CASSETTES
2
Insert the playback cassette into the player and the
cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Set to AUX. With this VCR, press NUMBER key “0” (AU
appears on the front display panel in place of a channel
number).
NOTE:
When using this VCR as the recorder, make sure to
select "FRONT" or "REAR" (depending on which input
connectors you use) at the Aux Input Screen (
੬
pg. 30,
"Edit From A Camcorder" steps 4 – 8).
START PLAYER
4
Set to its play mode.
START RECORDER
5
Set to its record mode.
Player Your VCR
AUDIO OUT
VIDEO OUT
VIDEO IN AUDIO IN
1 2 3
4 5 6
7 8
0
9
q 6 5
4
Y T
2 3
Another VCR Recorder
EDITING
NUMBER "0"