Start search, Access distant code, Start repeat – JVC HR-A62U User Manual
Page 20: Stop repeat, Playback and recording features (cont.), Skip search, Index search, Repeat playback
20
q
2
3
6
5
/
8
1
2
3
4
5
6
7
8
0
9
q
6
5
4
Y
T
2
3
STOP
STOP
PLAYBACK AND RECORDING FEATURES (cont.)
SKIP SEARCH
Skip Search
SKIP OVER UNWANTED
SECTIONS
1
Press SKIP SEARCH 1 to 4 times during playback. Each
press initiates a 30-second period of fast- motion
playback. Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search,
press PLAY.
Index Search
This function seeks out index codes that are placed on the tape
at recording start.
START SEARCH
1
While the tape is stopped, press SEARCH << or >>.
ACCESS DISTANT CODE
2
To access a recording 2–9 index codes away, press
SEARCH << or >> repeatedly until the correct number
is displayed on screen (only if SUPERIMPOSE is set to
ON (
੬
pg. 19). Playback begins automatically when
desired recording is located.
•To find the very beginning of the desired program, press
REW or FF and search visually for the start point.
VIDEO
SP
PLAY
H
M
S
FF
PLAY
REW
SEARCH
PLAY
REW
FF
Repeat Playback
START REPEAT
1
Press and hold PLAY (until "PLAY" blinks on the front
display panel) during playback, then release.
•The entire tape is played back 20 times.
STOP REPEAT
2
To stop, press STOP at any time.
NOTE:
Pressing PLAY, REW, FF or PAUSE also stops Repeat
Playback.