JVC HR-A62U - Manual (Page 10)

10
q
2 3
6 5 / 8
OK
CH
1 2 3
4 5 6
7 8
0
9
q 6 5
4
Y T
2 3
MENU
MENU
INITIAL SETTINGS (cont.)
SELECT D.S.T. MODE
6
You have three choices:
a–Select “AUTO” and the
adjustment to your VCR’s
clock will be made
according to the incoming
signal from the host
channel.
b–Select “ON” and the
adjustment will be made
based on the clock itself.
c–Select “OFF” if Daylight Saving Time doesn’t apply to
you.
Place the arrow next to your choice by pressing
CH
5∞, then press MENU and the Semi-Auto Clock Set
screen reappears.
D.S.T. SELECT
=AUTO
ON
OFF
PRESS ( 5,∞) TO SELECT
PRESS (MENU) TO END
Manual
SELECT MODE
2
At the Override Auto Clock Set screen, place the
arrow next to “MANUAL CLOCK SET” by pressing
CH▲▼, then press OK.
SET DATE, TIME AND D.S.T.
3
Press the appropriate
NUMBER keys to set the
date and time (if only 1
digit, press "0" first), and
press CH▲▼ to set AM/
PM and D.S.T. (Daylight
Saving Time) to “ON”
(automatic adjustment
based on VCR’s clock) or
“OFF” (if D.S.T. doesn’t apply to you).
Press OK after AM/PM and D.S.T. settings, and when
you’re finished with this screen, press MENU to start
the clock.
NOTE:
CH ▲▼ can be used to perform all operations. (In this
case, press OK after each setting.)
MAKE CORRECTIONS
4
To change any of the settings, press OK until the item
you want to change blinks, then set as in step 3.
MANUAL CLOCK SET
DATE 1/ 1/96 MON
TIME – – : – – AM
D.S.T. ON
PRESS NUMBER KEY(0-9)
OR ( 5,∞), THEN (OK)
PRESS (MENU) TO END
NUMBER
OK
CH